Courses / Comprehensive design 1

Course data
Code: BMEEPIPT811, BMEEPIPM1KX
Course requirements: BMEEPIPT711, BMEEPIPM111
Final requirements: Participation in 70% of the lessons is set as a condition. Only the active practice counts for presence.
Credits: 10
Time: 10 hours practice
Coursemaster: Bartók István DLA
Instructors: Bartók István DLA
Nagy Iván DLA
Szabó Dávid DLA
Szécsi Zoltán DLA
Vasáros Zsolt DLA
Árva József DLA
Description:
Information

for elaboration of the project 

Comprehensive design is a two semester course. The task of the first semester – Comprehensive design I – is the elaboration of the projects program design, Comprehensive design II is for the detailed elaboration of the design.

The subject will be fulfilled through the student’s work with the contribution of the department’s consultants. The progress is followed by consultations, the presentation and critics in public and studio work-conversation. The design program is chosen and elaborated by the student and accepted by the department. The plans of the establishment’s have to be completed m=1:100, or m=1:200 with constant consultation of the associate departments as follows:

Parts of the project to be completed:

 

1.      Concept design

2.      Preliminary design

3.      Final design 

Detailed description of the design phases:

 

1.      Concept design

For the building site chosen by her/himself by the given program the student elaborates and presents the concept design. The content of the working phase is the following:

1.1   Presentation of the building site chosen by the student – on 1 page with photos, another page with site plan showing the regulations of the site.

1.2   Site plan m=1:500 on 1 page, containing:

a./ the allocation of the establishments

b./ the circulation of vehicles, transportation, people with different signs, with parking, loading ramps, the proposal for outer road connections of the plot

c./ the allocation of the subsidiary establishments

d./ marking the entrances, gates

e./ the cardinal points

f./ in case of extension and connecting to an existing building the connection possibility

g./ in case of site sharing the planned new boundaries

h./ the regulations of the site and the parameters of the building in a comparative table on the site plan.

1.3   Disposition plan on 1 page (can be together with the site plan)– showing the ground floor with the main rooms, axis of columns, the function pattern/ flow diagram necessary for understanding.

1.4   Perspective views, sketches from birds-view or photomontage on 1 page.

 

2.      Preliminary design

After the presentation and evaluation of the concept design, the student elaborates and presents the preliminary design

2.1   Site plan m=1:500 on 1 page, containing:

a./ the building site’s boundaries, fences, gates, parking places

b./ the contour lines of the slope, the main level heights

c./ the connecting road system inside and outside the plot

d./ the cardinal points

e./ the planned buildings and objects of the plot with their names, main measures, and height dates

f./ the sign and names of roads, covered and green areas, the main level heights

g./ the height of ledge and ridge, the number of storeys

h./ tracks of the public utilities

i./ the circulation of vehicles, transportation, people with different signs

j./ eventual possible extension

2.2   Plans of each different levels m=1:200 containing:

a./ the cardinal points

b./ the main measures, (outer dimensions, axis of columns, height dates etc.)

c./ the doors, windows, gates

d./ constant fixtures and installations necessary for understanding

e./ the names and measures of the rooms

f./ the inner circulation of people and transportation

2.3   Sections m=1:200 with an elaboration corresponding with the plans necessary for understanding – at least 2 sections perpendicular to each other are necessary, it is recommended across the stairs, containing:

a./ marking the bearing structures and space separating structures

b./ the typical height measures

c./ the names of the structures and materials

2.4   Elevations m=1:200 at least 2 sides

2.5   Scale model – same scale as the site plan, marking the close surroundings and the slope conditions of the ground

 

3.      Final design

After the presentation and evaluation of the preliminary design, the student elaborates and presents the final design, containing the tasks of the associate departments beyond the architectural task (structures, building constructions, building installation, construction technology). The detailed content of the design is the following:

3.1   Site plan m=1:500, content due to 2.1

3.2   Plans of each different level m=1:100, or in case of a greater building m=1:200 checked by the consultant, content due to 2.2, except for those:

a./ beyond the main dimensions contain the measures of each room

b./ doors with opening direction, windows with subdivisions

c./ marking the functional necessary installation

d./ the names, measures and coverings of the rooms

e./ marking the close surroundings

3.3   Sections m=1:100 with a number necessary for understanding – at least 2 sections perpendicular to each other are necessary, it is recommended across the stairs, containing:

a./ the typical height measures and the plan measures of the axis

b./ the level heights

c./ the names of the structures and materials, the order of layers

d./ the main equipments with greater need of space

3.4   All elevations m=1:100, or in case of a greater building m=1:200 checked by the consultant, m=1:200

3.5   Perspective views, street-views or montage of photos showing the volume of the building from at least two views with surroundings

3.6   Technical descriptions – due to the requirements of each consulting department, in following chapters:

a./ Architectural description, containing: the design concept, the order, capacity and environmental connections of the establishment and the building(s). The extension opportunity should be alluded to, the proposal and reason of landscaping, the building’s floor plan (function), the bearing structure system, the architectural forming of volumes and elevations should be described.

b./ Description of structures

c./ Description building constructions

d./ Description of building installation

e./ Description of construction technology

Test

For practice planning skills and architectural, logical way of thinking there is one compulsory design tests during the semester. Since all necessary information will be given for completing the test, there is no need for previous preparation. The mark of the test counts 15% in the final mark of the course.

Other regulations, obtaining the final mark and the signature:

A./           Formal requirements: All drawings can be traditional hand- or CAD drawings or any other optional official scaled printed technique. The clear and correct technical presentation is important. For the mid-term and final plans, drawings A/3-A/2 sheets are recommended, the sheets can be at biggest 60x80 cm. The name of the author has to be marked on each plan. Only digital submission is required.

B./          The final project must be submitted by the deadline due to the timetable – irrespectively of its readiness.

C./           One test with at least a pass mark. The 1st test is obligatory.

D./           The project submission is due to the faculty’s regulation and enclosed timetable. In the mark of the final project architecture counts 60%, whereas the associate departments 10-10% each. The final mark is given from the weighted average of the final project and the results of the mid-term presentations.

  

3rd September 2021.


Bartók István DLA                                                          Zsolt Vasáros DLA

associate professor                                                        university professor

head of course                                                                head of department

Schedule:
1.8th February 2021, Monday 8:15-13:00 K 393 Introduction, Program analysis 
11th February 2021, Thursday 8:15-13:00 K 393 Program analysis 
2.15th February 2021, Monday 8:15-13:00 K 393 Elaboration of concept design 
18th February 2021, Thursday 8:15-13:00 K 393 Elaboration of concept design, Announcement of test 
3.22nd February 2021, Monday 8:15-13:00 K 393 Submission and presentation of test 
25th February 2021, Thursday 8:15-13:00 K 393 Elaboration of concept design – constructor’s day 
4.1st March 2021, Monday 8:15-13:00 K 393 Elaboration of concept design 
4th March 2021, Thursday 8:15-13:00 K 393 Elaboration of concept design 
5.8th March 2021, Monday 8:15-13:00 K 393 Concept design, 1. mid-term presentation, evaluation 
11th March 2021, Thursday 8:15-13:00 K 393 Elaboration of preliminary design 
6.15th March 2021, Monday  Day off (National holiday) 
18th March 2021, Thursday 8:15-13:00 K 393 Elaboration of preliminary design 
7.22nd March 2021, Monday  Studio week 
25th March 2021, Thursday  Studio week 
8.29th March 2021, Monday 8:15-13:00 K 393 Elaboration of preliminary design 
1st April 2021, Thursday K 393 Spring holiday 1st – 7th April 
9.5th April 2021, Monday K 393 Spring holiday 1st – 7th April 
8th April 2021, Thursday 8:15-13:00 K 393 Elaboration of preliminary design – constructor’s day 
10.12th April 2021, Monday 8:15-13:00  Elaboration of preliminary design 
15th April 2021, Thursday 8:15-13:00  Preliminary design, 2. mid-term presentation, evaluation 
11.19th April 2021, Monday 8:15-13:00 K 393 Elaboration of final design 
22nd April 2021, Thursday 8:15-13:00 K 393 Elaboration of final design, Preliminary design, 2. additional mid-term presentation (only for students, who did not pass the first presentation) 
12.26th April 2021, Monday 8:15-13:00 K 393 Elaboration of final design, Announcement of additional test 
29th April 2021, Thursday 8:15-13:00 K 393 Elaboration of final design, Submission and presentation of additional test 
13.3rd May 2021, Monday 8:15-13:00 K 393 Elaboration of final design 
6th May 2021, Thursday 8:15-13:00 K 393 Elaboration of final design 
14.10th May 2021, Monday 8:15-13:00 K 393 Project finalization week 
14th May 2021, Friday 12:00 K 251 Project submission Friday, May 14th 2021. 12oo 
15.   
21st May 2021, Friday 12:00 K 251 Delayed submission with late fee Friday, May 21st 2021. 12oo 
News
2022. 01. 13. 17:20
KX_2021-2022/2

Dear Students,
kindly find the list of accepted students for our Comprehensive Design 1 Course 2021/2022/2 spring semester.

We kindly ask you to reply about the acceptance of the obtained place to the following address: komplextervezes@gmail.com asap., but latest until 4.00 pm Friday 21st January 2021.
2021. 12. 22. 19:00

COMPREHENSIVE DESIGN 1 AND DIPLOMA COURSE APPLICATION

Dear future Comprehensive 1 and Diploma students,
kindly find enclosed the announcement, the application form for the Comprehensive 1 course 2022 spring semester and the slides of the 1st orientation lecture. Deadline for Comprehensive1 students for application and submitting the digital prtfolios: Friday 12:00 o'clock, 7th January 2022.

Orientation lecture about the topics: Wednesday 3:00pm, 5th January 2022 in person in the library of the Department of Explorative Architecture room: K 251. and via TEAMS. Teams code: 5mubhnx


2021. 02. 18. 09:24
Dear Students,

kindly find the questions and answers enclosed.


Dear Students,

kindly find the announcement of the comprehensive design test attached!
2021. 01. 27. 19:02
Dear Students,
please find the list of accepted students for our departmental Comprehensive Design 1 Course. There is an additional application until 3rd February 2021. 10.00 AM, please find the application form and a requirements in the previous announcement!
2021. 01. 15. 22:14
Dear Students,
kindly find the list of accepted students for our Comprehensive Design 1 Course.

We kindly ask you to reply about the acceptance of the obtained place to the following address: komplextervezes@gmail.com asap., but latest until 4.00 pm Tuesday 26th January 2020.
Attachments:
CD1_accepted_students_IND.pdf (51 kB)
Newer posts
Earlier posts